Sliding

Home  >>  Products  >>  Sliding

Sliding

VEKASLIDE

Lift sliding with exceptional thermal performances.

VEKASLIDE Lift sliding system sets new parameters in terms of performance and functionality. Thanks to the exceptional value of Thermal transmittance of the PVC system matched to an insulating glazing with Ug-value 1.1 W/m2K,you can easily reach a resulting value of 1.3 W/m2K Uw thermal transmittance of the fixture, value that exceeds the most severe requirements established by the decree on energy efficiency.

Like every VEKA systems, also Vekaslide is realized with Classe s compunding and profile Classe A gaunges, according UNI EN 12608 rule, thus giving to the final product the highest level of quality in terms of performance, duration and aging resistance. In addition, the robust structure of the extruded Class A profiles, combined with the use of suitable steel reinforcements ensure the maximum stability to the finished product and the ease of opening even in the case of a large glass wall.

Also from the aesthetic point of view VEKASLIDE is attractive, thanks to the linear and clean surfaces that answer to the most current requirements of the market. The coplanarity of the lines between the door and the frame as well as the seals, well hidden and the thermal threshold in light gray shade contribute significantly to the aesthetic appeal of the new system VEKASLIDE.

Pvc slidingVEKASLIDE 170 HST

TECHNICAL DATA SHEET OF SERIES:
Profiles: more rooms, visible height of 152mm by the side and 100mm in the middle. Internal steel bracing according to the guidelines VEKA

Basic sizes of the series:
– fixed frame section 170mm
– movable frame section 70mm

Uf Value: 1,60 W/m²K
Resistance to wind load: EN 12210
Thermal cauking: DIN 4108, EN 10077, EnEV rule
Gaskets: Central frame gasket and in the jamb of the perimetral door.
Design: traditional with rounded edges.

Applications: The series allows the realization of sliding doors (one or more doors), with the possibility of insertion of the threshold lowered to the ground.

Check out the new threshold with thermal break

 

Aluminium slidingEUROLINE 90S / 120S

TECHNICAL FILE OF THE SERIES:
Extruded profile: 6060 UNI 9006/1 alloy
Dimensional tolerances and thickness: ½ UNI3879.
Thermal-break: 2 continuous polyamide fingers of 16 mm with glass fiber reinforced.
Glazing: normal glazing beads cut at 90 .
Base size series 90 S:
– fixed frame section 90mm
– movable frame section 40mm
Base size series 120 S:
– fixed frame section 120mm
– movable frame section 50mm

USE: The series allows the construction of windows, french windows, sliding with thermal break with 2 or more doors.

Construction with thermal break, which allows the following types of openings to slide:
– two-track system: sliding two, three or four doors
– system in three tracks: three or six sliding doors.

Leaf weight up to 150 kg for the 90 series S, while up to 250 kg for the 120 series S.
Sealing system using special brushes with polypropylene fibers and stiff fin.

Possibility to create two-coloured profiles.
Profiles in completion of the series allow the creation of:
– fixed mirrors over or under light;
– combination with shutter fixture.